About Spray foam and home insulation

Home insulation contractors add or replace insulation in attics, walls, crawl spaces and basements and seal the air leaks around it. Common materials include spray foam, blown-in cellulose or fiberglass, and batts. Ask what material and R-value they recommend for each area and why, and whether they test for air leaks before and after the work. Check licensing, insurance and any utility rebate. Listings are local insulation and weatherization contractors.

Insulation and energy audit contractors by city

Spray foam and home insulation: costs, incentives and how to choose (2026)

Air sealing and insulation are usually the cheapest way to cut heating and cooling bills. They also make any future heat pump smaller and less expensive. This guide covers typical costs, the incentives that remain in 2026, and how to hire a good contractor, including the safety steps specific to spray foam.

What it costs

ItemTypical costSource
Home energy assessment$500–$700Focus on Energy, Wisconsin, 2026
Sealing and insulating ductwork in unconditioned spacesAbout $1,000 per home on averageNREL and Berkeley Lab, 2024
Wall insulation added when re-sidingAbout $5 per sq ft of wallNREL and Berkeley Lab, 2024
Full package: attic air sealing and insulation, wall insulation, low-e storm windowsMean about $9,000 per home in a cold-climate exampleNREL and Berkeley Lab, 2024

Attic jobs cost far less than wall or whole-house work. Prices depend on attic area, existing insulation levels, access, and the material chosen: blown-in cellulose or fiberglass, batts, or spray foam. Get quotes for more than one material, each stating the R-value to be installed.

Incentives and rebates in 2026

  • Federal tax credit: ended. The 25C credit, which covered insulation and air sealing within a $1,200 annual cap plus up to $150 for a home energy audit, applied only to work completed by December 31, 2025.
  • Weatherization Assistance Program: homeowners and renters at or below 200% of the federal poverty guidelines, or receiving SSI, can apply through their state's weatherization program and its local providers. DOE says households save $372 or more a year on average. Congress funded the program at $369 million for 2026.
  • Federal Home Energy Rebates (HOMES and HEEHR) include insulation and air sealing. They are run by states and open only in some, so ask your state energy office.
  • Utility programs are the most common source of help. Wisconsin's Focus on Energy, for example, pays $650 to $850 for contractor-installed attic insulation in 2026, depending on income, or $200 for a DIY project. Search your ZIP code in the ENERGY STAR Rebate Finder.

Savings and payback

EPA estimates homeowners save an average of 15% on heating and cooling costs, or 11% of total energy costs, by air sealing and adding insulation in attics, crawl spaces and rim joists. Savings are higher in cold climates. ENERGY STAR's analysis shows about 16–19% of heating and cooling costs in climate zones 5 to 8, against 7–9% in the hottest zones (1 and 2).

How to choose a provider

  • Start with an assessment. A BPI-certified energy auditor or building analyst can measure air leakage and find the gaps worth fixing first.
  • For spray foam, ask about SPFA certification. The Spray Polyurethane Foam Alliance runs a Professional Certification Program for installers.
  • Plan to leave home during spray foam work. EPA says occupants should vacate during installation. For professional two-part foam, some manufacturers recommend staying out for 24 hours. Ask for the specific product's re-entry and ventilation instructions in writing.
  • Get the scope in writing: areas covered, material, installed R-value, air sealing done before insulating, and how combustion appliances and ventilation will be checked afterward.
  • Check that the contractor qualifies for your rebate. Some programs, such as Focus on Energy, pay their standard rebates only for work by participating contractors.

Sources

Frequently asked questions

How much can insulation and air sealing save?

EPA estimates an average saving of 15% on heating and cooling costs, or 11% of total energy costs, from air sealing and insulating attics, crawl spaces and rim joists. Savings run about 16–19% of heating and cooling costs in cold climate zones and 7–9% in the hottest ones.

Do I need to leave my home while spray foam is installed?

Yes. EPA says occupants should vacate during spray polyurethane foam installation. For professional two-part foam, some manufacturers recommend waiting 24 hours before re-entry, so ask for the specific product's re-entry and ventilation instructions.

Is there still a federal tax credit for insulation in 2026?

No. The 25C credit for insulation, air sealing and home energy audits applied only to work completed by December 31, 2025. Help now comes from utility rebates, state-run federal Home Energy Rebates where open, and the Weatherization Assistance Program for income-qualified households.

Guide by the Sigma Earth Directory team, checked November 2026. Prices and incentives change; confirm with providers and your utility.

© Copyright 2026 Sigma Earth | All rights reserved